USER MANUAL
NAVCAM-616GPS
12
FAQ
Fault
Suggestion
The device has frozen /
stopped working.
Check the speed of your memory card. We recommend class
10 for faster transfer rates, especially If the record
file size is
bigger (say 15 min recording increments at 1080Full HD).
Alternately, check the car’s internal temperature. The device
will enter standby mode if the ambient vehicle temperature is
below 0 or above 30 degrees C.
The device will not start
recording, or stop recording or
has other intermittent faults
Most common cause of intermittent faults is an under rated
SD card. We recommend a class 10 card for this device as
recording at 4K resolution requires a superior speed card.
The speaker warning sounds
are a little loud. Can you turn
them off?
Yes. Just go the user settings screen and select speaker. Then
turn the speaker to OFF.
Device does not turn o
ff
If in vehicle: check that the 12V socket is not still powered (on)
when the key is removed (as with some European cars).
Wait 10 seconds for
fi
nalization and closure. Disconnect power
lead to device Press “ok” to stop recording, then turn o
ff.
Cant playback the .AVI video
files
Upgrade your windows media player version or use an
alternate media player such as VLC media player
My video/pictures of an
incident are NOT there
Check the capacity of your memory card, the
files may have
been overwritten in the record cycle process. If the Bump
file
record feature did not automatically preserve the footage, then
be sure to manually save the footage next time by pressing the
Can’t see the device in my
computer
Check the USB cable connection to the device and USB port. Try
another USB port, possibly directly to the PC/notebook (rather
than through a USB hub)
