Navien PeakFlowE GXXX001725 Скачать руководство пользователя страница 1

Installation, Operation and 

Maintenance Manual

Model #

GXXX001725

PeakFlowE   

Chemical-Free, Salt-Free Scale Prevention

Introduction

The PeakFlowE   Anti-Scale System provides protection from scale

formation on internal plumbing surfaces. The PeakFlowE

 

  system

is a single cartridge-based system that must be installed on a

cold water line prior to a single residential water heating device

(water heater or tankless water heater). 

The PeakFlowE

 

  system is built with the finest and most advanced

materials and each system is quality inspected and pressure

tested prior to shipment. With proper installation and routine

maintenance, you will have years of trouble-free operation. 

Please refer to this manual when performing routine filter changes.

The instructions make periodic maintenance quick and easy and

ensure you will receive maximum benefit from your system.

TM

System Specifications

Maximum Pressure:

 90psi / 6.2 bar  

Maximum Temperature: 

100°F / 38°C  

Minimum Temperature:

 40°F / 5°C

Inlet/Outlet Connections:

 

3

/

4

" FNPT

Capacity:

Media cartridge does not have a grain removal capacity.

However, other contaminants present in the water will gradually 

degrade the effectiveness of this cartridge.  Change the PeakFlowE 

media cartridge (#GXXX001726) at least once every two years.

WARNING

!

Read this Manual BEFORE using this equipment.
Failure to read and follow all safety and use information 

can result in death, serious personal injury, property 

damage, or damage to the equipment.
Keep this Manual for future reference.

WARNING

!

•   Connect system to cold water supply only. Water temperature 

cannot exceed 100°F / 38°C.

•   System must be installed in a vertical, upright and level 

position.

•   PeakFlowE

TM

  systems must not be used in conjunction with 

polyphosphate or any other scale inhibitor.

•    Do not use with water that is microbiologically unsafe or of 

unknown quality without adequate disinfection before or after 

the system.

Peak

FlowE

TM

TM

TM

Service Flow Rate:

 Up to 6 gpm (23 lpm)

Anti-Scale System

Continuous Flow Rate:

 Up to 4 gpm (15 lpm) 

TM

Отзывы: