background image

Sterilization Mode

ب

  Press ‘

MODE

’ button for 3 seconds then ‘

no

’ message will be displayed.

ة

Turn and adjust the dial until you see the message ‘

Yes

’ then press ‘

OK

’.

             ramp is turned on and sterilization mode is now activated.
      (takes 25 minutes and remaining time is shown)

Voice Volume Control

Press ’         ‘ button
3 levels to select

7. Additional Function

1. Drainage

2. Folding

3. Storage

ث

Plug two ‘Water Removal Kit’, which was included in product package, 

      one in the middle and the other one to any side of the mat hose. 
      (For single size, it has only 2 connectors so plug in 2 of  ‘Water removal Kit’ to both sides.)

ج

 Use a pump(syringe type) which was included in the ‘ Water Removal Kit’, 

      inject the air to the middle of connector and water will come out from the 
      other side of connector. (For Single size, inject the air into any side and skip step 

ح

)

ح

 Unplug one water removal kit from finished side and plug in other side. Repeat step 

ج

.

Trisect the mat and fold it twice. 
Repeat this step one more time.

Put boiler and  other parts inside the boiler storage bag . 
Put folded mat inside the mat storage bag. 

1

2

ب

Separate the

      connector from boiler.

ة

Press the water tank cover 

      of the boiler and invert it to 
      remove water inside.

ت

Lean the boiler forward and 

      press the connectors to 
      remove any remaining water.

8. Storage

Child Lock Mode

ب

 Press ‘         ’ button for 2 seconds to activate

ة

 Press for 2 seconds again to deactivate.

(Other modes are blocked when child lock is in active.)

Содержание COMFORTMATE EQH-20WUS

Страница 1: ... order to use the product as intended Store this manual in a place where it can easily be found There may be a change in appearance or dimensions of the product without prior notice for improvement of product quality Installation Instructions Quick Manual Comfort Mate ...

Страница 2: ...Panel 1 Connect 2 Poweron 3 FillingWater ب Make sure to place hose connector down facing up NAVIEN ة Connect each connector until you hear the click sound ب Plug in ة Press the power button on the boiler or remote controller ت Voice guidance will guide you to fill the water inside the boiler ب Pourdown500mlofwaterintoboilerandwaituntilwater circulateshosesinsidethemat ة Addwaterwhenyouhearwaterref...

Страница 3: ...tton ة set the temperature using button ت Complete setting by pressing OK button ForTwin size skip step ب ب Press button ة Press buttontosettheofftimer ت Press OK buttonto complete Sleepmodetemperaturecanbesetfrom86 Fto99 F From5hoursto10hour ب Press MODE button twice and ramp will be displayed ة When L R sign blinks turn the dial to left or right and press OK for the side you want to set up ت Set...

Страница 4: ...type which was included in the Water Removal Kit inject the air to the middle of connector and water will come out from the other side of connector For Single size inject the air into any side and skip step ح ح Unplugonewaterremovalkitfromfinishedsideandpluginotherside Repeatstep ج Trisect the mat and fold it twice Repeat this step one more time Put boiler and other parts inside the boiler storage...

Отзывы: