Navico WM-4, Руководство по установке

Страница: 5 / 28

WM-4 Marine Weather & Audio Receiver Installation Manual
5
Connections to Other Equipment
Requirement for ferrites on non-Simrad, Lowrance,
and B&G cables. If your Simrad, Lowrance, and B&G
equipment is to be connected to other equipment
using a cable not supplied by Simrad, Lowrance, and
B&G, a suppression ferrite MUST always be attached
to the cable near the Simrad, Lowrance, and B&G
unit.
Product disposal
Dispose of this product in accordance with the
WEEE Directive.
The Waste Electrical and Electronic Equipment
(WEEE) Directive requires the recycling of waste
electrical and electronic equipment. Whilst the
WEEE Directive does not apply to some Simrad,
Lowrance, and B&G products, we support its policy
and ask you to be aware of how to dispose of this
product.
IMO and SOLAS
The equipment described within this document
is intended for use on leisure marine boats and
workboats not covered by International Maritime
Organization (IMO) and Safety of Life at Sea
(SOLAS) Carriage Regulations.
Technical Accuracy
To the best of our knowledge, the information in this
document was correct at the time it was produced.
However, Simrad, Lowrance, and B&G cannot
accept liability for any inaccuracies or omissions it
may contain. In addition, our policy of continuous
product improvement may change specifications
without notice. As a result, Simrad, Lowrance, and
B&G cannot accept liability for any differences
between the product and this document. Please
check the Simrad, Lowrance, or B&G website to
ensure you have the most up-to-date version(s) of
the documentation for your product.
Simrad: https://www.simrad-yachting.com/help--
support/
Lowrance: https://www.lowrance.com/help-and-
support/
B&G: https://www.bandg.com/help--support/