24 |
Getting started |
RS90S User Manual
Entering data
Entering data with a wired handset
Enter data using the keypad. The first press of a key inputs the
number corresponding to the key; subsequent presses input letters
of the alphabet as indicated on the key. For example, 2, A, B, and C
are typed using the same key.
After a short pause, the cursor automatically jumps to the
next space; or, you can press [OK] to move to the next space
immediately.
¼
Note:
Characters can only be entered in upper case.
To replace a character:
•
Use the
Ż
and
Ź
keys to move the cursor to the character. You can
then type over the character.
To finish entering data:
Press [OK] repeatedly to reach the end of the line. The cursor will
then move to the next input required, or a save/cancel option will
be displayed for you to select as required.
¼
Note:
You can press [X] at any time to go back one step.
Entering data with a wireless handset
Use the
Ÿ
and
ź
keys to scroll through the available characters, and
then press [OK] to select the required character.
Warning messages
See “Appendix 4 - Warning Messages” on page 113.
Alert tones
See “Appendix 3 - Beep tones and call alerts” on page 113.