Navico MX420, Инструкция по установке и обслуживанию

Страница: 70 / 80

63
MX 420 Installation and Service Manual
ID DESCRIPTION ID DESCRIPTION
* APA Autopilot Sentence A RMB
Recommended Minimum
Navigation Information
APB Autopilot Sentence B RMC
Recommended Minimum
Specific GPS/ Transit Data
BOD Bearing Origin to Destination *Rnn Routes
BWC Bearing & Distance to Waypoint - Great
Circle
RTE Routes BWR Bearing & Distance to Waypoint - Rhumb
Line
*SNU Loran- C SNR Status DTM Datum Reference
VDR Set & Drift GGA GPS Fix Data
VHW Water Speed and Heading GLL Geographic Position - Latitude/
Longitude
VPW Speed Measured Parallel to Wind
GRS GPS Range Residuals
VTG
Course & Speed Over
Ground
GSA GPS DOP & Active Satellites
WCV Waypoint Closure Velocity GST GPS Pseudorange Noise Statistics
WPL Waypoint Location GSV GPS Satellites In View
XTE Cross- Track Error, Measured
HSC Heading Steering Command ZDA Time & Date
MSK MSK Receiver Interface ZTG
UTC & Time to Destination
Waypoint
MSS MSK Receiver Signal Status
* APA , Rnn and SNU are older sentence formats (version 1.5) not recommended for new
designs.
HDT Heading, True
ROT Rate of Turn
Table 5.1 NMEA 0183 Output Sentences
Input NMEA 0183 Sentences
The MX420 recognizes version 1.5, 2.0,2.1 and 2.3 NMEA input records. The MX420
can utilize the following input sentence formats:
Depth : DBK, DBS, DBT, and/ or DPT
Gyro : HCC, HDM, HDT, RMA (only when GPS is not available), RMC (only when GPS is
not available), VHW, and VTG (only when GPS is not available)
Position : GLL, RMA, RMC (only when GPS is not available)