Navico Lowrance LVR-880EU Скачать руководство пользователя страница 23 | Manualshive

Страница: 23 / 60

Navico Lowrance LVR-880EU Скачать руководство пользователя страница 23

23

1.  Select GPS/DATA then SETTING.
2.  Select TIME DISPLY.
3.  Select ON (on) or OFF (off) as desired. In this example, OFF has been selected and the LCD no

longer shows the time.

Note: If the time display is set ON, course and speed data are NOT displayed on the LCD, irrespective
of the COG/SOG setting. See Section 3.6.6.

3.6.5

Position Display Options (LL DISPLY)

If your vessel position and time data are being updated through a GPS navigation receiver, you can
show or hide your vessel position on the LCD.

MENU SELECT
LOCAL/DIST
CONTRAST
>GPS/DATA

GPS/DATA

MANUAL
>SETTING

SETTING

TIME FORMAT
TIME DISPLY
>LL DISPLY

LL DISPLY

ON
>OFF

1.  Select GPS/DATA then SETTING.
2.  Select LL DISPLY.
3.  Select ON (on) or OFF (off) as desired. In this example, OFF has been selected and the LCD no

longer shows the vessel position.

3.6.6

Course & Speed Display Options (COG/SOG)

If your vessel position and time data are being updated through a GPS navigation receiver, you can
show or hide your course over ground (COG) and speed over ground (SOG) data on the LCD.

MENU SELECT
LOCAL/DIST
CONTRAST
>GPS/DATA

GPS/DATA

MANUAL
>SETTING

SETTING

TIME DISPLY
LL DISPLY
>COG/SOG

COG/SOG

>ON
OFF

1.  Select GPS/DATA then SETTING.
2.  Select COG/SOG.
3.  Select ON (on) or OFF (off) as desired. In this example, ON has been selected and so the LCD

shows the bearing and speed.

Note: If TIME DISPLY is ON, the course and speed data are NOT displayed on the LCD, irrespective
of the COG/SOG setting. See Section 3.6.4.

3.6.7

GPS Alert (GPS ALERT)

If the GPS Alert is ON and the GPS navigation receiver is disconnected, the alarm sounds.

Note: The default setting is ON for the VHF 880EU and OFF for the VHF 880US.

MENU SELECT
LOCAL/DIST
CONTRAST
>GPS/DATA

GPS/DATA

MANUAL
>SETTING

SETTING

LL DISPLY
COG/SOG
>GPS ALERT

GPS ALERT

>ON
OFF

1.  Select GPS/DATA then SETTING.
2.  Select GPS ALERT.
3.  Select ON (on) or OFF (off) as desired.

«
...
21
22
23
24
25
...
»

Содержание Lowrance LVR-880EU





























































Отзывы:

Нет отзывов