www.NavePoint.com
3
-Squared Hole Mounting
- Slide the Mounting Brackets onto the rails on the shelf and push the Mounting Brackets all the way to the front until
it stops.
1
Locate the numbered square openings in the mounting rails where you plan to install your shelf. You will
install cage nuts into the square openings to provide an attachment point for the mounting screws .
a-
From the inside of the mounting rail, insert one of the flanges of the cage nut through the square opening.
Press it against the side of the square opening. Each flange should engage one side of the square opening, not
the top or bottom.
b-
Compress the cage nut at the sides slightly to allow the remaining flange to fit through the square opening.
When the cage nut is properly installed, both flanges will protrude through the square opening and will be
visible on the outer surface of the mounting rail. Repeat steps 1a and 1b until all required cage nuts are
installed.
2
After installing the required cage nuts, use the included mounting screws and plastic washers to secure
your shelf to the rack rail.
