NavAtlas NS14A, Инструкция по установке и эксплуатации

Страница: 5 / 11

NS14A/NS27A/NS35A INSTALLATION
5
Connection Descriptions
NOTE:
Be sure to follow specific instructions included with your product. The informa-
tion below should be used as a general guide only.
RED Power wire (12V+)
• Disconnect negative battery terminal before proceeding. Consult a qualified
technician for instructions if you are unsure.
• Plan wire routing before cutting any wires to length. Use a grommet when
running wires through the firewall or metal openings.
• Use extreme caution when drilling holes to avoid damaging fuel lines or
existing vehicle wiring.
• The +12V wire must be fused within 18” from the battery for protection of the
vehicle’s electrical system.
BLACK Ground wire (GND)
• Choose a clean unpainted section of metal or the vehicle chassis when
attaching the ground wire. Be sure to clean the area of any dirt or grease.
UNIVERSAL DIN CABLE (INCLUDED)
• BLUE LED wire (12V+) - Turns LED ON/OFF
• WHITE/RED RCA - Left/Right audio inputs
• GREY RCA - DIGITAL COAXIAL HI-DEF INPUT (DO NOT CONNECT TO ANALOG
AUDIO SOURCE)
*DIGITAL OUT NOT USED
UNIVERSAL CABLE
L
R
Digital
8 pin waterproof DIN connector
LED ON/OF
F