BHM
02/04/16
NTV-DOC251
Agreement
:
End user agrees to use this product in compliance with all State and Federal laws. NAV-TV Corp. would not be held liable for misuse of its product.
If you do not agree, please discontinue use immediately and return product to place of purchase. This product is intended for off-road use and passenger
entertainment only.
3 |
P a g e
W166-VIM Radio Removal (GLE)
1.
Remove climate control panel using plastic pry tools
(clips only).
2.
Remove radio trim using plastic tools (clips only).
3.
Remove (2x) Torx screws on the bottom left and right
side of the radio (previously hidden by radio trim).
4.
Once screws are removed, slide the silver metal
brackets downwards (towards floor) to release radio
from sub-dash.
5.
Pull radio straight towards you, disconnect all
harnesses and set the radio aside.
W166-VIM Installation
1.
Locate and remove the OEM (typically orange) MOST fiber optic connector
from the main Euro-style radio plug. This will be connected to the male end
of the NAV-TV harness in step 3.
2.
Connect the (female end) of the provided
Plug & Play T-Harness
to the main
Euro-style radio plug. Drop the 18-pin connector down beneath the radio sub
dash area to behind the climate control area for ease of install.
3.
Connect the OEM MOST fiber optic plug to the male end of the provided
Plug & Play T-Harness
in the same location it was removed (from the OEM
plug).
4.
Connect the male end of the NAV-TV harness to the radio at the proper port.
Reconnect all other harnesses and reinstall the radio into the dash.
