BHM
8/1/13
NTV-Doc 134
Agreement
:
End user agrees to use this product in compliance with all State and Federal laws. NAV-TV Corp. would not be held liable for
misuse of its product. If you do not agree, please discontinue use immediately and return product to place of purchase. This product is
intended for off-road use and passenger entertainment only.
6 |
P a g e
the default music player). This varies with many devices and your individual device must be
tested after installation to see if "AUTOPLAY" is supported with your Android device.
The behavior of all button assignments are limited by the SWC interface’s ability to read the
vehicle steering wheel button presses and deliver them to the paired Smartphone or Tablet.
Since the SteerBlue emulates the exact functions of the buttons on the device, the operation
will be dependent on the stock functionality of each paired device. E.G. if the HOME button
pressed once on an Android device launches the
music app
, then a single press assigned to the
END
(HOME) button will launch the
music app
.
FAQ & Troubleshooting
Q1: I installed the SteerBlue, paired my device successfully but the steering wheel controls do nothing.
A1: The SteerBlue has an LED on the circuit board that blinks slowly when a device is paired to it and
active. When no device is connected to the SteerBlue or active, the LED blinks VERY slowly. When the
unit receives IR commands from the steering wheel control interface it blinks rapidly. When pressing the
steering wheel buttons are you seeing the LED blink rapidly? If yes check to make sure that you have
programmed the steering wheel control interface correctly according to the manufacturer's directions,
the proper Clarion radio type on page 3 of these directions, and that you have assigned the steering
wheel buttons according to the recommendations on pages 3 & 4. If no, the SteerBlue is not receiving
any IR commands from the steering wheel interface. Did you plug the male 3.5 mm connector from the
steering wheel control interface into the female 3.5 mm female connector of the SteerBlue? Inspect
your wiring, connections and contact the manufacturer of the steering wheel control interface if
problems persist.
A2: Check to make sure that the SteerBlue device shows "connected" in your devices' Bluetooth
manager. If it does not show connected, delete the device and repair it. The SteerBlue will not function
on any paired device until the paired device shows that it is connected.
Q2: I programmed everything correctly but not all buttons are working.
A1: Make sure that the functions assigned to each button are correct and reprogram the steering wheel
control adapter for the correct functions.
A2: In some cases not all steering wheel control buttons function with certain steering wheel control
adapters. Check the compatibility of your make, model, year and trim level with the installation and
operation manual of the steering wheel control interface. If problems persist contact the manufacturer
of the steering wheel control interface.
