BHM
01/04/19
NTV-DOC339
4 |
P a g e
Agreement
:
End user agrees to use this product in compliance with all State and Federal laws. NAV-TV Corp. would not be held liable for
misuse of its product. If you do not agree, please discontinue use immediately and return product to place of purchase. This product is
intended for off-road use and passenger entertainment only.
RGB-VWv2 Remote Control / Brightness Setting
•
The RGBv2 uses a (provided) remote for the following optional adjustments:
o
Arrow keys adjust (shifts) VIDEO 1 or 2 image
LEFT, RIGHT, UP &
DOWN
(
OEM pass through image is not adjustable
)
o
Zoom/Page arrows adjust brightness
o
Pressing
MENU>MAP>BACK
(in order) will
default all settings
.
•
To adjust brightness of VIDEO 1 or 2 image, use the buttons
on the RGB side of the module and adjust to suit.
NOTE:
when completing install, mount the RGBv2 module so that
the buttons are not being pressed.
RGB-VWv2 Operation
After all connections are properly made:
•
When the vehicle is placed into reverse (white/red wire on the interface receives 12v +),
the navigation screen will switch to
Video 1
source (reverse camera).
•
In any other gear (but reverse) toggling the white/blue wire (12v (+) to the white/blue
wire)
will switch the factory navigation screen to
Video 2
source*.
