If vehicle has factory rear view camera
If vehicle has aftermarket rear view camera
1. Unplug RCA’s attached to the T-Harness
2. The RCA connector towards car, extend and plug into the
“Camera in” on the A/V box.
3. The RCA connector towards radio, extend and plug into
“video out” on the A/V box.
(
Requires the PCM3CAM, BT, or Media kit, otherwise will
not show backup cam)
1. Unplug RCA’s attached to the T-harness.
2. The RCA connector towards car, do
nothing with.
3. The RCA connector towards radio, extend
and plug into “video out” on the A/V box.
4. Plug aftermarket rear view camera into
“camera in” on the A/V box.
12 Pin Molex wiring guide
12 Pin Molex connector image
Pin (1) Video out (high)
Pin (2) Video in (high)
Pin (4) Left audio (high)
Pin (3) Camera in (high)
Pin (5) Right audio (high)
Pin (6) Ground (Black wire)
Pin (7) Video out (low)
Pin (8) Video/CAM in (low)
Pin 10 Left/Right audio (low)
Pin (12) Co12volts In
Operation
Video in motion doesn’t need any programming just plug and play. Whenever a DVD is playing or an external video
source is on, the radio will always show an image.
To operate A/V input:
1. Press
source
button.
2. Press TV icon.
3. Under TV station presets, select preset #2 (play).
4. Then tap above preset icons in blank area to display image.
Agreement:
End user agrees to use this product in compliance with all State and Federal laws. NAV-TV Corp. would not be held liable for misuse of its product.
If you do not agree, please discontinue use immediately and return product to place of purchase.
2 |
P a g e