5. Next, remove (2x)
Phillips head screws on
the top and bottom of the
LCD housing:
6. Caref lly separate the metal
bracket from the LCD housing,
this will expose the touch panel
ribbon cable and allow the LCD
screen to be separated from the
back half of the housing:
7. ow separate the metal
housing from the LCD
panel. Lifting the opposite
side of the touch panel
ribbon will give you easy
access to remove the
ribbon connectors:
8. isconnect the ribbons carefully with a small flat head
screwdriver
from the circuit board side
. Set the LCD panel
aside for now, it is not needed for this modification:
NTV-DOC223
