Honda Accord 2013-2015 / Odyssey 2014-2015 Installation
10 |
P a g e
Trouble Shooting
Please follow all the steps in this installation manual, failure to do so might
void the product warranty and damage the factory radio
Power
Navigation system should have (2) led lights on the module box for
indication of power and data connections.
Display
No Display
1.
There are two led lights at the GPS module to indicate data
and power. If led lights are OFF and radio is ON, check the
power fuse inside the black box from the main harness
2.
Check all wiring connectors for any loose connection
3.
Check all wiring shielding for any damage during the
installation process
4.
Check all wiring for any type of damage
5.
Check display Y cables for loose, misalignment, or damage
No Touch Response
1.
Check NAV mode ONLY for touch responses
2.
Check led lights for power and data indications
3.
Check Display Switch Box connections for any loose
connection, or damage
No GPS software loaded, touch screen alignment screen occurred
1. Check map SD card at GPS module, see any sign of missing,
loose, pop-out, misalignment, or damage
2. Turn on DIP switch 6 to activate touch panel calibration and
check for improvement
Sound
1.
Check all cable for connections to Audio Box for loose, or damage
2.
Check software volume settings, ensure volume is not muted
3.
Check connections at radio for loose, damaged wires
NTV-DOC225
