JR, BM
4/11/14
NTV-DOC137
rB4
Agreement
:
End user agrees to use this product in compliance with all State and Federal laws. NAV-TV Corp. would not be held liable for
misuse of its product. If you do not agree, please discontinue use immediately and return product to place of purchase. This product is
intended for off-road use and passenger entertainment only.
2 |
P a g e
Overview
The MOST-HUR (Head Unit Replacement) allows the user to install a feature-rich aftermarket
radio while retaining the factory amplifier and converting audio signal to the factory fiber optic
system. This is the fastest and easiest way to upgrade sound quality and features without
performing “major surgery” to the vehicle. The HUR module also provides Vehicle Speed Sense
(VSS out), 12v Reverse (out), hand/foot brake (out) and Illumination (out) for convenience.
Kit Contents
Module Programming
MOST HUR Harness
NTV-HAR095
MOST HUR Module
NTV-ASY156
Fiber Optic extension
cable/connector
NTV-HAR067/NTV-CON002
Antenna Adapter
NTV-CAB027
USB Cable
NTV-CAB009
To download radio specific files go to
http://www.navtv.com/page/19/downloads.ht
ml
. These files are designed to make
installation easier. If you do not see your radio
listed, you can use a generic file to interface
with the M.O.S.T. amplifier, you just will not
retain steering wheel control.
*Note
: Only Alpine or Kenwood are officially
supported for retaining steering wheel
controls.
*Note 2
: When adjusting volume is needed
(factory amplifier gain control), change in
increments of 5.
*Note 3:
Fade control is not available due to
factory system limitations.
