DS, BM
4/15/14
NTV-DOC141
rB6
Agreement
:
End user agrees to use this product in compliance with all State and Federal laws. NAV-TV Corp. would not be held liable for
misuse of its product. If you do not agree, please discontinue use immediately and return product to place of purchase. This product is
intended for off-road use and passenger entertainment only.
3 |
P a g e
OPTI-1 Installation
1.
S CLASS, CL, SL Vehicles: You must decode the voice recognition from the car via a local
dealer before removing the COMMAND radio.
2.
ALL VEHICLES:
Base-line the factory COMMAND radio:
a.
Adjust the volume to a comfortable listening level
b.
Tune the radio to an
AM station
(otherwise you may lose AM tuning ability)
c.
Be certain the
MUTE
function is not enabled
d.
Center the balance and fade, center the bass and treble
e.
Be certain there are no other problems with the factory MOST system before
installing this unit.
3.
Remove the COMMAND radio.
4.
Disconnect the power harness from the back of the COMAND and remove the optic
cable inner plug by gently prying the retaining clip back with a pick tool (see
FIG 1 & 2
below)
5.
Insert the optic cable inner plug into the provided M.O.S.T. outer coupler (see
FIG 3 & 4
below) and plug the completed new assembly into the fiber optic input of the OPTI-1.
FIG 1:
CLS, E, SLK Factory MOST Plug
FIG 2:
CL, S, SL Factory MOST Plug
FIG 3:
Fiber cable removed from factory plug
FIG 4:
Optics installed in the provided coupler