BHM
09/05/19
NTV-DOC347
Agreement
:
End user agrees to use this product in compliance with all State and Federal laws. NAV-TV Corp. would not be held liable for
misuse of its product. If you do not agree, please discontinue use immediately and return product to place of purchase. This product is
intended for off-road use and passenger entertainment only.
4 |
P a g e
4.
No other wired connections are needed for a basic install. If adding a camera, the
purple
wire
outputs 12v
in reverse only
(vehicle muse be running) for power to camera.
5.
Disconnect the OEM LVDS cable (gray connector, blue cable. Red lock tab must be
unlocked first) and insert the male side into the radio tuner. Connect the OEM cable to
the female end of the provided LVDS I/O cable.
6.
Connect the blue end of the provded cable to
port LVDS port on the IOT-RVC interface.
7.
Connect the reverse camera (if added) and front camera (if applicable) to the proper
RCAs (RVC:
‘
CAMERA
’
and FVC:
‘
CVBS IN
’
)
8.
Proceed to
‘
IOT-RVC Operation