BHM
02/18/19
NTV-DOC166
Agreement
:
End user agrees to use this product in compliance with all State and Federal laws. NAV-TV Corp. would not be held liable for
misuse of its product. If you do not agree, please discontinue use immediately and return product to place of purchase. This product is
intended for off-road use and passenger entertainment only.
2 |
P a g e
Interface Connectors
Dip Switch Settings* Configure prior to installation
Dip SW:
1
2
3
4
5
6
7
8
UP
Enables
RGB
Enables
V1
Enables
V2
Enables
V3
Resolution
adjust
Resolution
adjust (2)
Factory or no Rev-
Cam
N/A
DOWN
Skips
RGB
Skips
V1
Skips
V2
Skips
V3
Resolution
adjust
Resolution
adjust (2)
Activates
aftermarket Rev-Cam
N/A
AV IN/OUT
OUOUT
Power/CAN
OUOUT
Dip Switches
Status LEDs
*Note: If the dip switches are not configured prior to
installation you must remove power to the unit prior to
making adjustments to the dip switches. When power is
reconnected after the dip switch adjustment the new
settings will be stored into memory.
LCD IN/OUT
(LVDS Cable)
Touch
IN/OU
T
OUOU
T
TX/RX
