BHM
05/15/14
NTV-DOC145
Agreement
:
End user agrees to use this product in compliance with all State and Federal laws. NAV-TV Corp. would not be held liable for
misuse of its product. If you do not agree, please discontinue use immediately and return product to place of purchase. This product is
intended for off-road use and passenger entertainment only.
2 |
P a g e
Installation
1.
Using a plastic pry tool remove
the bezel from around the DVD
player to expose DVD/Radio
tuner.
2.
Lay down a cloth or a towel on
center console as to not scratch
the console when the radio is
removed.
3.
Remove (4) Phillips head screws
from all (4) corners and (2) 10mm
nuts from both sides.
4.
While holding down the brake
pedal,
Shift vehicle into Drive to remove
radio. Pull radio straight out.
5.
Remove factory wire harness
from behind radio.
6.
Remove the factory fiber optic clip from factory 44-
pin harness connector.
7.
Insert the fiber optic clip into the male end of the
provided T-harness.
Plug &
Play T-
Harness
Insert
factory
fiber
