BHM
11/17/16
NTV-DOC149
rB5
Agreement
:
End user agrees to use this product in compliance with all State and Federal laws. NAV-TV Corp. would not be held liable for
misuse of its product. If you do not agree, please discontinue use immediately and return product to place of purchase. This product is
intended for off-road use and passenger entertainment only.
5 |
P a g e
MY FORD TOUCH Installation Notes
Be certain that forced factory camera operates normally with the
Blue wire
(touch
temporarily to 12v +) from the F-CAM kit before beginning this process.
Refer to the diagram on page 6 and make connections.
12v (+) to your toggle
CAN NOT
be powered from the provided
Red ACC OUT
wire from
the DIFF CAM Board. You must use a vehicle
ACC (+) source.
DIFF video wires to be cut in half on the
NAV-TV Plug & Play harness are White &
Gray/Black
if TS-CN harness
or Blue and
Blue
if CWB harness
. Make the cut on the
monitor side of the harness. You will need
to remove the cover with the lock attached
– it slides straight off once releasing clips.
Follow the chart below to connect the Video output wires from the DIFF Board R1:
Upon completion, the user will be able to flip a single toggle switch and the factory
display will switch from factory image to the attached front camera image.
PIN #
Description
Color
Connects to
3
Video IN – (Car Side)
White/Orange
PIN 4 (Car Side)
4
Video OUT (Screen Side)
Orange
PIN 4 (Screen Side)
7
Video IN + (Car Side)
White/Blue
PIN 5 (Car Side)
8
Video OUT + (Screen Side)
Blue
PIN 5 (Screen Side)
TS-CN Harness
CWB Harness
NOTE:
TS-CN
harness does not
have PIN
numbers labeled.
You will have to
count and
reference picture
here.
4
5
4
5
