2 |
P a g e
8 Pin Molex wiring guide
8 Pin Molex connector image
Pin (1) CAN High (Out) - Yellow/Black wire (radio side)
Pin (2) CAN Low (Out) - Yellow wire (radio side)
Pin (3) Ground – Black wire
Pin (4) Not used - White/Red
Pin (5) CAN High (In) – Yellow/Back wire (vehicle side)
Pin (6) CAN Low (In) – Yellow wire (vehicle side)
Pin (7) +12Volt constant power – Red wire
Pin (8) VIM manual activation to 12V+ – White/Blue wire
Activating Interface
To test / operate video in motion.
Start vehicle
Start playing a DVD. Image should display while in park.
Place vehicle into drive, you should get a safety screen stating video is disabled while in motion.
On the steering wheel press the mute (diamond) button or VR (person talking) button twice to enable VIM.
Video should now be displayed.
To disable VIM, Press mute (diamond) or VR (person talking) button twice again.
Notes:
1) To manually activate the interface 12volts to the Molex connector Pin 8 (White/Blue wire) through a toggle
switch to enable / disable VIM mode.
2) Some vehicles may not have the Diamond button and will have a Voice button instead. In this case, the Voice button
should be used to activate the VIM mode.
Agreement:
End user agrees to use this product in compliance with all State and Federal laws. NAV-TV Corp. would not be held liable for misuse of its product.
If you do not agree, please discontinue use immediately and return product to place of purchase.
