BHM
02/06/17
NTV-DOC278
Agreement
:
End user agrees to use this product in compliance with all State and Federal laws. NAV-TV Corp. would not be held liable for
misuse of its product. If you do not agree, please discontinue use immediately and return product to place of purchase. This product is
intended for off-road use and passenger entertainment only.
6 |
P a g e
HDMI Setup
In order to use the HDMI feature of this kit, it must be setup via the OSD menu first.
1.
Put dip switch #1 in the
DOWN
position.
2.
Activate the ‘NAV INPUT’ by holding
the
HOME
button on the iDRIVE
knob controller.
3.
Once ‘NAV INPUT’ shows on the
screen, on the remote press the
OK
BUTTON
4 times
, then press
POWER
.
4.
Navigate to the
‘NAVI’
section.
a.
Select
‘HDMI-SEL’
b.
Choose
‘HD95’
c.
Press
MODE
on the remote to
return
5.
Navigate to the
‘AV’
section.
a.
Select
‘AV1-SEL’
b.
Choose
‘HDMI’
6.
If the user desires
front camera
timer
, set it up now through
‘FRON
CAM’
under
‘SET’
and choose timer
length. If adding front camera and no
timer is desired, use DIP SWITCH #2
instead (only).
7.
Replace dip switch #1 to the
UP
position.
