17
BMW 1 Series 2008
Installation Instructions
STEP 10
Step 1:
Plug-in the RCAs from Vehicle Specific Plug and Play Harness (Part # NT-QUADLOCK-V1)
into the AUX port of the vehicle using supplied AUX cable (Part # NT-AUX-35).
The product installation is now complete. Do not reassemble the vehicle until testing is fully complete.
After you have tested that everything is working, you reassemble the vehicle. If you are adding side or
front cameras, install them and plug them into the appropriate camera RCAs. If you are installing any
HDMI or streaming devices, connect them to the HDMI port of the NavTool.
Back of Car Radio
Factory Wire
Click
Vehicle Specific
Plug and Play Harness
(Part # NT-QUADLOCK-V1)
NavTool Supplied Harness
(Part # NT-WHNT6)
AUX Cable
(Part # NT-AUX-35)
AUX Input
Note:
If your vehicle is not equipped
with AUX input, there is a way to retrofit
your vehicle with AUX, contact us for
more deatils
