18
Chevrolet Tahoe 2012-2014
Thank you for purchasing NavTool. If you have any questions, please call toll-free at 877-628-8665.
The color/navigation screen will display a factory image when you first start your vehicle.
• Set the radio to AUX input to hear the HDMI audio. See page C2 for details.
User Manual For Consumer
Not Equipped
HDMI
Aftermarket
Rear
Camera
Aftermarket
Front
Camera
Aftermarket
Left
Camera
Aftermarket
Right
Camera
Not Equipped
Fig. 1
C1
• Press and hold supplied push button for 3-5 seconds. The interface will activate on the screen.
• Single press of the push button will cycle through the available video inputs.
• Press the push button until HDMI input is highlighted and you will enter the HDMI mode.
• Video signal from your HDMI source will appear on the screen. If no video source is connected or
the connected source is not correctly working, you will see this message.
• To turn off HDMI input, press and hold the supplied push button for 3-5 seconds.
After everything is tested and working, reassemble the vehicle.