Installation | Device Installation
7. Mark location for the Nauto 3 Device.
Using the live images as guidance, mark the location for the Nauto 3
Device on the windshield with tape or marker. For optimal device
performance:
a. The forward-facing camera should have a clear view of the front
of the vehicle with no obstructions.
b. The forward-facing camera should not be blocked by window tint or
metal film found near the rearview mirror. If neither side of the
rearview mirror will produce the desired result, please contact Nauto
for additional options.
c. The driver-facing camera should not be easily obstructed by the
driver-side visor or other OEM or aftermarket equipment.
d.If the device can be placed behind the rearview mirror, the driver-
facing camera should be located halfway between the rearview mirror
and the headliner.
e. The cameras should not block any sensors or rearview mirror functions.
f. The rearview mirror should maintain a full range of motion.
8. Clean the desired location using the provided swab.
Dry the area with a clean paper towel, removing all film and residue.
9. Peel the liner from the adhesive on the windshield mount.
10. Slowly align the device into position.
Check the live images on the app. If your view is properly aligned, gently
press the whole assembly to the windshield.
- Ensure that the top of the Nauto 3 Device is not touching the
headliner
- If necessary for optimal placement, only allow a portion of the
adhesive to be on the frit/metallization
Interior view of Nauto 3 Device
10
© Nauto 2020. All RightsReserved.
FMCSA Exemption
Important Note:
Nauto has received an
exemption from the FMCSA that allows for
installation of the device up to 8 inches
below the upper edge of the area swept
by the windshield wipers, provided it
remains outside of the driver's and
passenger's normal line of sight to the
road. This may allow you to place a device
below the rearview mirror/monitor.
Please confirm this placement is
acceptable with the customer's fleet
manager.
REMINDER: DO NOT EXCEED THIS 8-INCH
LIMIT.
