Nautilus U627 Скачать руководство пользователя страница 4

4

•  Before each use, examine this machine for damage to 

power cord, power receptacle, loose parts or signs of wear. 

Do not use if found in this condition. Monitor the Seat, Pedals, and Crank Arms closely. If purchased in US/Canada, 

contact Customer Service for repair information. If purchased outside US/Canada, contact your local distributor for 

repair information.

•  Maximum user weight limit: 150 kg (330 lbs.). Do not use if you are over this weight.

•  This machine is for home use only.

•  Do not wear loose clothing or jewelry. This machine contains moving parts. Do not put fingers or other objects into 

moving parts of the exercise equipment.

•  Set up and operate this machine on a solid, level, horizontal surface.

•  Make the Pedals stable before you step on them. Use caution when you step on and off the machine.

•  Disconnect all power before servicing this machine.
•  Do not operate this machine outdoors or in moist or wet locations. Keep the foot pedals clean and dry.
•  Keep at least 0.6 m (24”) on each side of the machine clear. This is the recommended safe distance for access and 

passage around and emergency dismounts from the machine. Keep third parties out of this space when machine is in 

use.

•  Do not over exert yourself during exercise. Operate the machine in the manner described in this manual.

•  Correctly adjust and safely engage all Positional Adjustment Devices. Make sure that the Adjustment Devices do not 

hit the user.

•  Exercise on this machine requires coordination and balance. Be sure to anticipate that changes in speed and 

resistance level can occur during workouts, and be attentive in order to avoid loss of balance and possible injury.

•  A machine should never be left unattended when plugged in. Unplug from outlet when not in use, and before putting 

on or taking off parts.

•  This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental 

capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning 

use of the appliance by a person responsible for their safety. 

•  Children should be supervised to ensure that they do not play with the appliance.

• 

SAVE THESE INSTRUCTIONS.

Содержание U627

































Отзывы: