Nautilus NT 1810, Инструкция по сборке, Страница: 4 / 8

1 Smith Guide Rod
Smith Guide Rod Holder
Left Smith Slider Assembly
Right Smith Slider Assembly
Cap Head Screw - 3/8" x .5"L
Set Screw - 5/16" x .5"L
Set Screw - 5/16" x .25"L
3/8" Washer 2
2
1
1
4
2
2
4
2
3
4
9
11
12
13
A. Slide the LEFT SMITH SLIDER ASSEMBLY (3) onto a SMITH
GUIDE ROD (1) in the orientation shown. Place the SMITH
GUIDE ROD (1) in the Left Lower Guide Rod Holder (A).
B. Place a SMITH GUIDE ROD HOLDER (2) on top of the
SMITH GUIDE ROD (1) with the hole for the set screw in the
SMITH GUIDE ROD HOLDER (2) to the rear of the machine.
Attach the SMITH GUIDE ROD HOLDER (2) to the cage
using the hardware shown, and loosley tighten.
TM
3
step
1
Step #1 Materials:
# Description
Qty.
NT-1810
D. Repeat Steps A - C for the remaining SMITH GUIDE ROD (1)
and the RIGHT SMITH SLIDER ASSEMBLY (4).
11
2
3
13
9
1
A
A
12
4
C. If there is not a SET SCREW (12) already pre-installed in the
Left Lower Guide Rod Holder (A), loosely thread one in place