manualshive.com logo in svg

Nautilus Bowflex VeloCore, Инструкция по сборке и эксплуатации, Страница: 26 / 36

Поделиться
Скачать
Nautilus Bowflex VeloCore Скачать руководство пользователя страница 26

Assembly / Owner’s Manual

26

Shoe Clips (Cleats)

Foot pedals that are equipped for cycling shoes with cleats provide secure footing on the exercise bike. The shoe cleats provided fit both the right 

and left Pedals.

Prior to use, make sure you understand the operation of the engagement / release mechanism for the pedals and cleats (shoes).
Keep cleats and bindings clear of dirt and debris to ensure engagement and release.
Check the cleats periodically for wear. When the cleats are worn, replace them. Replace the cleat when it becomes difficult to 

release, or starts to release with much less effort than when it was in new condition.

Pedals and cleats are SPD Compatible. They fit any shoe size with the correct cleat mounts: shoes with “Standard 2-Hole MTB SPD Cleat Mounts” 

(MTB SPD = Mountain Bike Shimano Pedaling Dynamics).

Speakers

To play audio through the speakers on your machine, open an App on the Console and allow it to stream audio. 

Note: 

  Your machine is also able to receive and play audio across a Bluetooth

®

 connection from your device or stream audio from the machine to 

your Bluetooth

®

 device (such as Bluetooth

®  

headphones). Bluetooth

®

 audio can only be streamed in one direction (in or out) at a time.

Содержание Bowflex VeloCore





































Отзывы:

Нет отзывов