8
Installation Procedure
Step 5 Attach the LCD Bracket
Parts needed:
LCD Bracket
Four 1/4” x 1” Phillips Head Screws
Tools Needed:
Phillips Head Screwdriver
5-1
Pass the LCD wires through the Bracket between
the metal plate and the plastic cover as shown.
(Figure a)
5-2 align the Bracket with the Console mounting
holes on the mast. (Figure B)
5-3 Replace the original Console hardware with the
four 1/4” x 1” Phillips Screws provided.
5-4 Completely tighten the hardware. (Figure C)
LCD Wires
Plastic Cover
Metal Plate
Pass Wires through Bracket
LCD wires
Mast
1/4”x1” Phillips Screw
Figure a
Figure B
Figure C
