Nautilus Be Strong Commercial R916, Руководство по обслуживанию

Страница: 48 / 68

48
Mechanical Procedures
figure 34 -
figure 35 -
figure 36 -
figure 37 -
U916 Procedures
REMOVING THE UPPER HANDLEBAR:
Tools needed:
Phillips screwdriver or Cordless drill with Phillips tip
6 mm Allen wrench
Step 1: Remove the console according to REMOVING THE
CONSOLE procedure.
Step 2:
Remove the four Allen screws attaching the Handlebar
to the frame with a 6mm Allen wrench. See Figure 34 .
Step 3: Carefully pull the cables out from the Mast ( Figure 35 ).
Step 4:
Reverse the steps to install a new Handlebar assembly
on the machine.
REPLACING THE UPPER RIGHT OR LEFT CHR PLATES:
Tools needed:
#0 Phillips screwdriver
Step 1:
Carefully remove the two screws from the rear CHR
plate and separate the plates. See Figure 36 .
Step 2: Disconnect the black CHR wire from the rear plate and
place to the side. See
Figure 37
.