Nautilus Hyosung MX5300, Функция оператора

Страница: 20 / 127

Operator Function
© 2009 Nautilus Hyosung Inc. All Rights Reserved. 17
Below items are to set up to communicate with RMS when supporting TCPIP
- USE URL function is to set up RMS address as IP or URL. If setting value is
“ENABLE”, use URL as RMS address. Otherwise, use IP as RMS address.
- RMS CONNECTION TYPE function is to set up whether to connect from ATM to
RMS, or from RMS to ATM. If setting value is “ACTIVE”, connect from ATM to
RMS. Otherwise, connect from RMS to ATM.
-
NAME function is to set up RMS address. If “USE URL” is “ENBLE”, input URL of
RMS. Up to a maximum of 50 characters. Otherwise, input IP of RMS. Input 15
characters such as XXX.XXX.XXX.XXX.(Refer to display for the details)
- RMS SEND INTERVAL function is to set up the time to send the status of the
ATM to the RMS periodically. Setting up the hours as the unit and setting up 4
hours as default. Be able to input 1~24.
- ATM LISTENING PORT function is to set up required port number when
connecting from RMS to ATM. Setting up “5555” as default.
- RMS LISTENING PORT function is to set up required port number when
connecting from ATM to RMS. Setting up “9999” as default.
5) The PASSWORD function is used to set the RMS password to connect to ATM
from RMS.
6) RMS CALL BACK OPTION function provides a function for only permitted ATM
to connect to RMS. The CALL BACK EN/DISABLE function is to set up whether
to use RMS CAL BACK function. If setting value is “ENABLE”, ATM makes a call
to RMS using phone number saved on ATM when making a call to ATM by
RMS and put down the call .
The RETRY COUNT function is to set up the number of times to attempt
“CALL BACK”
- Touch Machine