Chapter3. ATM Dimensions & Installation Information Installation Manual
3-10
© 2016
Nautilus Hyosung Inc.
All Rights Reserved.
Bolting down the MX8200QT
► To bolt down the MX8200QT using the Anchor Bolt Location Sheet (template), perform the following
steps:
1. Ensure that the surface where the MX8200QT is to be placed is level so that the unit will not tip
over when opening the upper/lower modules or the door.
2. Place the anchor bolt location sheet where the MX8200QT is to be installed.
3. Drill the correct diameter and depth holes at the locations marked on the sheet.
4. With the groove of the anchor bolt facing up, drive the anchors into the holes drilled in step 3.
5. Place the MX8200QT on the bolt location sheet, matching the mounting holes of the unit with the
anchors.
6. Firmly tighten the mounting bolts in the anchors.