Chapter5. Receipt Printer Operator Manual
5-4
© 2016
Nautilus Hyosung Inc.
All Rights Reserved.
3. Add the receipt paper into the rod and then insert the roll guide tightly again to fix it.
4. The shiny side of the paper should be faced up to be printed properly and the metallic
tension guide should be surrounded with paper to reduce the tension during feeding.
5. Insert the leading edge of paper between lower guide and upper guide of the receipt
printer slowly. When the machine is initialized, the paper is going to start feeding.
6. If the paper does not feed at all during initializing, make sure that paper has a CLEAN
CUT at the end and the Thermal Print Head (TPH) is closed as shown in picture below.
7. Close the upper front body.
Upper Guide
Lower Guide
Roll Guide
