Nauticomp Genesis 24-1510LED, Руководство пользователя

Страница: 5 / 31

Page 5 of 31
1 GENERAL continued…
1.4 Warnings
1.4.1
Product Installation:
This equipment must be installed and operated in accordance with the
Nauticomp instructions provided. Failure to do so could result in poor product performance, personal
injury and/or damage to connected items.
1.4.2
Electrical Safety:
Make sure you have switched off the power before you start installing this
product. The display unit contains high voltages. Adjustments require specialized service procedures and
tools only available to qualified service technicians. There are no user serviceable parts or adjustments.
The user should never attempt to service the equipment doing so will void the products warranty.
1.4.3
Navigation Aid:
When this display is used within a navigation system, it is only an aid to navigation.
Its accuracy can be affected by many factors, including equipment failure or defects, environmental
conditions, and improper handling or use. It is the user’s responsibility to exercise common prudence and
navigational judgments. This unit should not be relied upon as a substitute for such prudence and
judgment. Always maintain a permanent watch so you can respond to situations as they develop.
1.4.4
TFT Colour LCD Displays:
The colours of the Display may seem to vary when viewed against a
coloured background or in coloured light. This is a perfectly normal effect that will be seen with all colour
LCD displays. In common with all Thin Film Transistor (TFT) panels, the screen may exhibit a few (less
than 7) wrongly illuminated pixels. These may appear as black pixels in a light portion of the screen, or
as coloured pixels in black areas.
1.4.5
EMC Conformance:
The design and manufacture of Nauticomp equipment and accessories conform
to the appropriate Electromagnetic Compatibility (EMC) standards, but correct installation is required to
ensure that performance is not compromised. Nauticomp displays are designed to comply with EN55022
Class A-Emission, EN 55024- Immunity Standards & EN 60945.
1.4.6
Disposal: Waste Electrical and Electronic Equipment (WEEE) Directive
This Product complies with the WEEE directive (2002/96/EC) marking requirements. The
affixed label indicates that you must not discard this electrical/electronic product in domestic
household waste. To dispose of your Nauticomp electronic product, please contact your local
Nauticomp dealer, distributor, or the factory directly by visiting www.nauticomp.com.
1.4.7
User Manual Content:
The technical and graphical information contained in this handbook, to the
best of our knowledge, was correct as it went to press. However, our policy of continuous improvement
and updating may change product specifications without prior notice. As a result, unavoidable differences
between the product and handbook may occur from time to time. Nauticomp cannot accept liability for
any inaccuracies or omissions it may contain.
1.5 Important Information
This User manual contains important information on the installation and operation of your new display. In order to obtain
the best results in operation and performance, please read this User Manual thoroughly. Nauticomp’s Technical Service
representatives or your local dealer will be available to answer any questions you may have.