Page 5 of 30
1
GENERAL continued1
1.4
Warnings
1.4.1
Product Installation:
This equipment must be installed and operated in accordance with
the Nauticomp instructions provided. Failure to do so could result in poor product performance,
personal injury and/or damage to connected items.
1.4.2
Electrical Safety:
Make sure you have switched off the power before you start installing
this product. The display unit contains high voltages. Adjustments require specialized service
procedures and tools only available to qualified service technicians. There are no user
serviceable parts or adjustments. The user should never attempt to service the equipment
doing so will void the products warranty.
1.4.3
Navigation Aid:
When this display is used within a navigation system, it is only an aid to
navigation. Its accuracy can be affected by many factors, including equipment failure or defects,
environmental conditions, and improper handling or use. It is the user’s responsibility to exercise
common prudence and navigational judgments. This unit should not be relied upon as a
substitute for such prudence and judgment. Always maintain a permanent watch so you can
respond to situations as they develop.
1.4.4
TFT Colour LCD Displays:
The colours of the Display may seem to vary when viewed
against a coloured background or in coloured light. This is a perfectly normal effect that will be
seen with all colour LCD displays. In common with all Thin Film Transistor (TFT) panels, the
screen may exhibit a few (less than
7) wrongly illuminated pixels. These may appear as black
pixels in a light portion of the screen, or as coloured pixels in black areas.
1.4.5
EMC Conformance:
The design and manufacture of Nauticomp equipment and
accessories conform to the appropriate Electromagnetic Compatibility (EMC) standards, but
correct installation is required to ensure that performance is not compromised. Nauticomp
displays are designed to comply with EN55022 Class A-Emission, EN 55024- Immunity Standards
& EN 60945.
1.4.6
Disposal: Waste Electrical and Electronic Equipment (WEEE) Directive
This Product complies with the WEEE directive (2002/96/EC) marking requirements.
The affixed label indicates that you must not discard this electrical/electronic product
in domestic household waste. To dispose of your Nauticomp electronic product,
please contact your local Nauticomp dealer, distributor, or the factory directly by
visiting www.nauticomp.com.
1.4.7
User Manual Content:
The technical and graphical information contained in this
handbook, to the best of our knowledge, was correct as it went to press. However, our policy of
continuous improvement and updating may change product specifications without prior notice.
As a result, unavoidable differences between the product and handbook may occur from time to
time. Nauticomp cannot accept liability for any inaccuracies or omissions it may contain.
1.5
Important Information
This User manual contains important information on the installation and operation of your new display. In order
to obtain the best results in operation and performance, please read this User Manual thoroughly. Nauticomp’s
Technical Service representatives or your local dealer will be available to answer any questions you may have.
