10
PREPARATION FOR USE
Installing the Camera - housing tray attachment
* drawings as illustrations only
1
4
2
3
unlock camera tray lever and
remove the tray from the housing
lock camera tray
*
place the zoom/focus knob in
place and make sure it is engaged
with lens gear
*gently push the drive dial and
main switch downwards make
sure they are engaged with the
levers on the camera
attach the camera tray by tightening
the tray screw into the tripod socket
of the camera
make sure the camera buttons are
engaged with the camera tray
*
pull out the zoom/focus knob if
installing the camera with lens and
gear attached
*
lift up drive dial and main switch
each time before installing the
camera
slide the camera tray back into the
housing along the tray rail
