Prepar
16
1.
After verifying that the main O-ring is in good
condition, lightly coat it with the lubricant
provided.
2.
Make sure the O-ring groove located in the
front part of the housing is free from any foreign
material; the groove can be cleaned with the aid
of a microfiber cloth.
3.
Place the main O-ring into the groove, first at
the corners, then the whole perimeter.
4.
Setting up the moisture alarm:
1.
Ensure removal of the insulation
film before installing a battery.
Then install the battery provided
into the battery compartment on
the circuit board inside the housing.
P
REPARATION OF THE
H
OUSING
