19
1.
Remove the retainer O-ring of
the viewfinder inside the rear
half of the housing by making
use of the recess on the
To remove the viewfinder:
To re-install the viewfinder:
In order that users can change to a preferred viewfinder easily, the
0.66X viewfinder which comes with this housing is designed so that it can be
removed and re-installed by following the simple steps described below.
2.
Gently push the viewfinder
from the inside of the housing.
1.
Lightly coat the O-rings on
the outer periphery of the
viewfinder body with
lubricant.
2.
Align the viewfinder with
the sleeve in the display
window.
3.
Push the viewfinder from the
outside of the housing until it
cannot go in any further.
4.
Place the retainer O-ring of
the viewfinder back from
inside the housing.
