11
1.
After verifying that the main O-ring is in good condition, lightly coat it with the
lubricant provided.
2.
Make sure the O-ring groove located in the front part of the housing is free
from any foreign material; the groove can be cleaned with the aid of a
microfiber cloth.
3.
Place the main O-ring into the groove by gently pushing it, first at the corners,
then the whole perimeter.
4.
If necessary, spacers can be used to increase space between the grip handles
and the housing; please use the longer screws provided to attach the grip
handles and the spacers to the housing.
5.
To install the Nikonos 5-pin bulkhead (Optional, M16 to M14 step down adaptor
required):
ii.
Install the M16 to M14 step down
adaptor with a spanner.
i.
Remove the M16 plug from the
threaded hole with a coin.
