Nauticam NA-A6600, Инструкция по эксплуатации

Страница: 21 / 33

Connect
21
S
WITCHING BETWEEN
V
IEWFINDER AND
M
ONITOR
1) Using VF/LCD Lever
Auto switching between the viewfinder and monitor is a default setting. The auto switching is disabled
when the monitor is tilted, and the monitor will be always on. This will also affect the function of
VF/LCD lever on the housing. To use VF/LCD lever, remove the LCD monitor support from the camera
saddle. See page23 to remove the LCD monitor support.
2) Using Custom Botton
Firstly, set the method for switching the display between the
electronic viewfinder and the monitor to manual. Go to
“
Camera Setting2 ” (purple tab) “ Display/Auto Review1 ”
(page6) “ FINDER/MONITOR ”, then select
“
Monitor(Manual)
”.
Secondly, assign a button for switching. Go to “ Camera Setting2 ”
(purple tab) “ Custom Operation1 ” (page8) “ Custom
Key(Shoot.) ”, then select a prefered key and
set it to
“ Finder/Monitor Sel. ”