Connect
22
S
WITCHING BETWEEN
V
IEWFINDER AND
M
ONITOR
1) Using VF/LCD Lever
Auto switching between the viewfinder and monitor is a default setting. The auto switing is
disabled when the monitor is tilted, and the monitor will be always on. This will also affect
the function of VF/LCD lever on the housing. To use VF/LCD lever, remove the LCD monitor
support from the camera saddle. See page23 to remove the LCD monitor support.
2) Using Custom Botton
Firstly, set the method for switching the display between
the electronic viewfinder and the monitor to manual. Go
to “
Camera Setting2
” (purple tab)
“
Display/Auto
Review1
” (page6)
“
FINDER/MONITOR
”, then select
“
Monitor(Manual)
”.
Secondly, assign a button for switching. Go to “
Camera
Setting2
” (purple tab)
“
Custom Operation1
” (page8)
“
Custom Key(Shoot.)
”, then select a prefered key and
set it to “
Finder/Monitor Sel.
”
