15
P
REPARATION OF THE
H
OUSING
1.
After verifying that the main O-ring is in
good condition, lightly coat it with the
lubricant provided.
2.
Make sure the O-ring groove located in
the front part of the housing is free from
any foreign material; the groove can be
cleaned with the aid of a microfiber cloth.
3.
Place the main O-ring into the groove,
first at the corners, then the whole
perimeter.
4.
Optional
: If necessary, spacers
(#25011)
can be used to increase space between the
grip handles and the housing; A pair of
small handles
(#28123)
is also available to
decrease space between the grip handles
and the housing.
5.
Setting up the moisture alarm:
1.
Install
the
CR2032
battery
provided
into
the
battery
compartment on the circuit board
inside the front part of the
housing.
