14
1
2
4
3
5
unscrew the M16 plug from 25080 M28-M16 Step
Down Adapter on the monitor housing with a coin and
remove the caps of M16 SDI Bulkhead and SDI surface
cable
tighten the M16 SDI Bulkhead into the pre-installed
M28-M16 step down adapter
plug the cable into the SDI bulkhead
* drawings as illustrations only
SDI Surface Cable to Monitor Housing
CABLE CONNECTION - SDI OUT
*Please note that M16 SDI Bulkhead, 25060 SDI cable and SDI surface cable is not included in the package
SDI Surface
Cable Cap
M16 SDI Bulkhead Cap
M16 SDI Bulkhead
M16 Plug
turn the two locking levers in the direction as shown
then connect the 25060 SDI cable to the M16 SDI
bulkhead as shown
place the monitor inside the housing
then wrap the internal SDI cable around the battery and
connect the cable to the monitor SDI-out socket
then secure the monitor by turning the two locking
levers towards the monitor
