14
P
REPARATION OF THE
H
OUSING
1.
After verifying that the main O-ring is in
good condition, lightly coat it with the
lubricant provided.
2.
Make sure the O-ring groove located in
the front part of the housing is free from
any foreign material; the groove can be
cleaned with the aid of a microfiber cloth.
3.
Place the main O-ring into the groove,
first at the corners, then the whole
perimeter.
4.
Setting up the moisture alarm:
1.
Install the CR2032 battery
provided
into
the
battery
compartment on the circuit
board inside the front part of the
housing.
