MOUNT THE GEAR ON A LENS
1. Insert the plastic C-ring as shown and
place it over the lens.
For Old version of 19122 (A534114 before), the
rubber ring on the lens should be removed
before insert the plastic C-ring.
2 Insert the N105VR-F Focus Gear on the
plastic C-ring until it reaches the flange
of the plastic C-ring.
3. To remove the N105VR-F Focus Gear,
reverse the above steps.
The tightness between the N105VR-F
Focus Gear and the lens can be
adjusted by removing or adding rubber
grips on either sides of the plastic C-
ring, spare rubber grips are included in
the package.
