Current as of 2022-7-11
I
DENTIFICATION OF
P
ARTS
PREPARATION
OF
THE
PRODUCT
1.
After verifying that the sealing silicon O-ring is in good con-
dition, lightly coat it with the lubricant provided and wipe
away the excess.
2.
Make sure the O-ring groove is free from any foreign mate-
rial; the groove can be cleaned with the aid of a microfiber
cloth.
3.
Carefully place the port O-ring into the groove, ensuring that
it lays flat and inside the entire groove.
4.
Inspect the O-ring again, make sure there is no lint or hair
on the O-ring
5.
Lift up the entire system and inspect where the housing
back and port meet the housing. There should be a thin, uni-
form gap with no extruded O-ring.
Float collar
4x thumb screws
Shade
Shade cover ring
Shade base ring
Base fixing ring
Lens cap
4x M3 screws
