Current as of 2020-03-16
If TTL-Converter is in “Controlled Manual Mode” or “Simple
Manual Mode”, then set “Manual mode without pre-flashes” by
the switches on the strobe body.
•
Adjust strobe light power by the second dial switch on the strobe body.
S
HOOTING WITH
F
LASH
O
FF
•
Photographer can assign “Fn“ button to option “flash off” (by camera
menu).
•
Pushing the “Fn” button, user can shoot with flash off.
S
TATUS
I
NDICATOR
The status indicator will display the battery status as well as modes selected.
It will flash GREEN/BLUE/RED when shutter release is triggered.
GREEN
– In TTL mode, battery OK.
BLUE
– In Manual mode, battery OK.
RED
– Battery low, replace battery.
S
TORAGE
After shooting please switch off the camera.
Slide off TTL-Converter’s connector from the camera’s Hot Shoe socket.
This way you defend the TTL-Converter from any accidents. Also, you
save TTL-Converter’s battery, because its current consumption is
minimum then.
For a long time storage remove batteries from TTL-Converter.
O
PTIONAL
A
CCESSORIES
26704 M14 Nikonos 5-pin Bulkhead with Micro Connector for Nikon TTL
Converter (Compatible with NA-D5/D500)
26705 M14 Ikelite Style Bulkhead with Micro Connector for Nikon TTL
Converter (Compatible with NA-D5/D500)
26216 Universal Optical Fiber Cable
S
PECIFICATIONS
Compatible Cameras:
All Nikon DSLR
Compatible Housings:
Nauticam NA-D5 / NA-D500 / NA-D850
Compatible TTL Strobes:
INON: Z-240 type4, Z330,
D200/S2000
Sea&Sea: YS-D1, YS-D2, YS-250
Ikelite: DS-161, DS-160
F1-SF150-SF160
TTL Outputs:
2 Optical, 2 Electric wire
Camera ISO range:
50 ~ 25600
Continuous Shooting:
Compatible
Rear Curtain Sync:
Compatible
Switching TTL/M modes
underwater:
Yes, by camera menu
TTL Flash Exposure
compensation:
Yes, by camera controls
Maximum Fiber optic
cable length for “TTL”
operation:
3meters
On/Off switch:
Automatic
Battery Type:
CR 2032 x2pcs
Battery Capacity:
5-7 years or 75000 flashes
Dimensions:
85mm x 45mm x 13mm
Weight:
Approx. 25g (without batteries)
