Current as of 2016-11-04
--- continued from front page ---
C
ONNECT TO THE
C
AMERA
Make sure the locking lever is in "REL" position. Slide the flash trigger hotshoe
connector into camera hotshoe until it cannot go in any further.
Flip the locking lever to the "LOCK" position to secure the trigger.
Test the flash trigger by pressing the shutter release button of the camera, the
LEDs in the front should turn on instantaneously.
To detach, reverse the above steps.
S
PECIFICATIONS
Construction:
Body: PC+ABS
Dimensions:
Approx. 80 x 50 x 28mm
Weight:
Approx. 70g (w/ batteries installed)
Battery:
CR 3032
x2pcs
Operation:
Manual
Flash Capacity:
Approx. 5000times
Compatible Strobes:
INON: Z240 type 4, D2000 type 4, S2000
Sea&Sea: YS-D1, YS-01, YS-250
Compatible Housings:
26301: NA-1DXII, 1DX, 5DIV, 5DSR, 5DMKIII,
6D, 7DMKII
26303: NA-D4s, D4, D810, D800, D750, D600
26304: NA-D7200, D7100
