14
PREPARATION FOR USE
Setting up integrated LED flash trigger
* drawings as illustrations only
1
2
insert the CR2032 batteries into the battery holders
the small LED located next to the batteries indicate the battery level, please
change the batteries once they turn
RED
connect the hotshoe plug to the camera hotshoe
test the flash trigger by pressing the shutter release button on the camera
the LEDs under optical bulkheads should flash instantaneously
* positive terminal should be facing up
This housing uses an integrated LED flash triggering system. This optical flash trigger can fire at the full fps of the
camera, making it the ideal solution for the rapid fire fast action shooting. The LED trigger circuitboard is mounted
directly to the front of the housing, and connected to the camera with a hotshoe cable.
small LED
*
please contact our authorized service centers if testing fails
